Iron Off - Professional Iron Remover and Wheel Cleaner
Iron Off - Professional Iron Remover and Wheel Cleaner
34 sold in the last 22 hours
JOIN OUR VIP TEXT CLUB
Discover your discount for The Last Coat
Brought to you by The Last Coat comes Iron Off, our heavy-duty professional-strength iron remover and wheel cleaner which can also be used to decontaminate painted surfaces, glass, and more. (Do not use on raw aluminum, Iron Off could etch it.)
Iron Off helps remove stubborn ferrous brake dust and iron from wheels and other surfaces.
You'll know Iron Off is working when you start to see the wheel surface "bleeding" a purple/red color, as it breaks down the iron to a water-soluble state.
Typical decontamination methods can have a tough time removing deeply embedded iron and other contaminants from the surface. Washing typically won't remove these.
Why You'll Love Iron Off:
➡️ Extend the life of your vehicle by stopping corrosive chemical reactions that lead to rust and permanent issues in your paint.
➡️ Even if you can't see it, oftentimes, contamination is there. Iron Off helps get rid of this contamination quickly and effortlessly.
➡️ It helps stop the damage that hot iron particles can do to your vehicle, preserving the life and value of your vehicle in the long run.
➡️ It helps neutralize corrosive reactions and when you see it beginning "bleeding" purple, you'll know that Iron Off has begun the process of releasing embedded contaminants.
➡️ Iron Off, like all of our products, is extremely easy to use. It gets you great results every time you use it and just gets the job done efficiently and effectively.
***Important: Keep in mind that Iron Off is strong, and it will degrade previously applied coatings to a degree. Even professionally installed ceramic coatings. So if you apply to paintwork or ceramic coated wheels, or surfaces that have been coated with any of our products, you will want to reapply those coatings after Iron Off has done its job.***
Directions for Using Iron Off:
Do not work in direct sunlight. Only work on a surface when it is cool to the touch
1. First off know that Iron Off has a strong smell, so make sure to use it in a well-ventilated area. Then, shake the bottle very well then spray directly on to the surface. (Only do so in the shade when the wheel surface is cool to the touch). Spray directly on them when dirty. Pre-rinsing may dilute Iron Off when you spray it on the surface.
2. Let Iron Off dwell on the surface for 2-5 minutes. As Iron Off goes to work on ferrous brake dust and contaminants, it will turn a purple/red color as it breaks down the iron to a water-soluble state for easy removal (do NOT let Iron Off dry on the wheels/surface).
3. Rinse Clean with high-pressure water to remove all of Iron Off.
4. If wheels were extremely contaminated with brake dust to start, a follow-up hand wash with soap and water on the wheels is recommended to remove any leftover Iron Off.
5. Optional but recommended. Apply The Last Coat or Deep Ice to protect. Finish off with a layer of AMP if desired. If you had our coatings applied before using Iron Off, then you will definitely want to reapply to the treated areas as the coatings will degrade slightly.
** It is recommended to spot test first before full application and use.
Safety Information:
• Avoid inhalation. Use adequate ventilation. Iron Off has a strong smell, you want to use it in a well-ventilated area.
• May be harmful if swallowed. May cause skin burns and eye damage. Make sure to wear protective equipment where needed. We recommend gloves.
KEEP OUT OF REACH OF CHILDREN
- Reviews
- Questions
- wheels
- coat
- shine
- brake dust
- Iron Off
- work
- stuff
- results
- black ice
- wheel cleaner
CeraTrim is the BOMB!
CeraTrim lived up to the hype. My Shelby Mustang's black plastic trim was totally grey due to sun fading. CeraTrim brought it back to life and made the plastic areas look like it just rolled off of the dealer lot. Easy to apply and works instantly. Hands down the best product to use to restore plastic and rubber parts of your car. Thank you to The Last Coat!
Easy Longevity
I have a F250 Superduty crewcab with a 8ft bed.I can wax every inch of it in 2 hours with The Last Coat ceramic and it still beads up for 6 months.probably could get by with 1 wax job a year but I do 2 just for added protection.Very very satisfied customer.
Iron Off
I found the Iron Off to be the best wheel cleaner of all the wheel cleaners. I use it on all my detailed vehicles and they all loved their wheels when picking their vehicles up. They ask me what I used so I tell them Iron Off by the Last Coat
Unbelievable voodoo magic
Iron Off transformed wheels with 2+ years of brake dust, dirt and grime into a factory shine again. You may need to do a second application for stubborn areas, but take the time because it’s worth the effort. Oh, and when you’re done with cleaning them, give them a good coat of TLC2 to keep them clean longer. You’ll be glad you did,
Incredible cleaner
As with all of the products that I've used, it was superb!
