CeraTrim - Ceramic Powered Trim Restorer (8 oz.)
CeraTrim - Ceramic Powered Trim Restorer (8 oz.)
sold in the last 22 hours
Brought to you by The Last Coat comes our ultra-durable ceramic-based trim restorer, CeraTrim.
CeraTrim uses our popular and effective ceramic technology to bond deep into the pores of plastic trim surfaces, removing the impurities that have built up in the plastic and effectively restoring them to their original appearance. Check out the video below to learn more and to see how easy it is to apply and how much to use:
Unlike most trim products, CeraTrim is no mere dressing or stain. It is a true ceramic coating that will give your trim surfaces superior hydrophobic and self-cleaning properties and will protect your trim for the long haul under any driving conditions while restoring them to a newer appearance.
CeraTrim can be used on all trim pieces throughout your vehicle, inside and out. It can be used on engine bay plastics to restore their appearance.
We have also used CeraTrim as a durable tire dressing, but keep in mind this is an "off-label" use and requires 2-3 coats. (please note for interior pieces it will make them glossy, so if you prefer the matte look, best to avoid CeraTrim for the interior.)
CeraTrim can be layered to get an even higher shine or deeper wet look, and even more protection. It can be re-applied over time as desired as well.
All CeraTrim Kits Come with the Following:
➡️ 1 x 8 oz. Bottle of CeraTrim
➡️ 1 x Foam Applicator (this is our preferred way of applying as seen in our videos. We like the foam applicator provided as it allows us to push CeraTrim into the pores of the surface more effectively.)
Directions for Applying CeraTrim:
Step 1: Plastics and rubbers need to be as clean as possible before applying CeraTrim. Any prior dressings should be removed. You do not want anything affecting the bonding of CeraTrim to the trim surface. You will want to use a basic vehicle soap (no wax-based soaps), but in addition, you will need to use a degreaser or all-purpose cleaner (APC) and a soft bristle brush to agitate down into the texture of the plastic or rubber.
Step 2: With high-pressure water, thoroughly rinse the area ensuring to get full removal of any soaps or detergents.
Step 3: If the plastic or rubber doesn't become fully clean and bare, repeat the process until you achieve the deepest clean possible.
Step 4: Thoroughly dry the plastic or rubber and then apply CeraTrim with the included applicator.
Step 5: Allow it to dwell for 5-20 minutes (depending on how faded the surface is).
Step 6: IMPORTANT - DO NOT SKIP THIS STEP - After the dwell period take a dry microfiber towel and buff the trim surface to remove excess residue that will be sitting on top. This is very important.
Please Note: Full cure time for CeraTrim is 24 hours. Do not let these surfaces get wet in the first 24 hours after application.
We know you'll love CeraTrim as much as we do and as much as our customers have. It is a versatile, durable, true restoration product that will bring trim plastics and rubbers back to life in a big way, and keeping them looking that way for a long time! If you have any questions, feel free to reach out to us.
***Please note, applying CeraTrim can make surfaces very slick when wet, so when applying to running boards on your vehicle please keep this in mind as they may be quite slippery when wet.***
Proposition 65 Warning: This product contains Methanol which is on the Prop 65 List for Chemicals of Concern. For more information go to www.P65Warnings.ca.gov
- Cera Trim
CeraTrim is long last... over one the last time it was applied. Adds a deep rich tone to plastics. Can use on any color plastics, on interior, exterior, and engine bay. The look is simply amazing. Its not just a coating, it is a restorer. Other top products like this are for black plastics only and exterior use only and contain black dye.
The Best I Have Used
Cannot believe how well this works. I have tried it on many things, from all the black trim parts on my vehicle, to under the bonnet in the engine bay, onto a badly faded kitchen laminated benchtop. It works and lasts longer than I had ever expected and it has won me over. How it rejuvinanted an area of faded laminated benchtop was the most unbelievable thing, especially after trying many other products. Unbelievable product.
Cera Trim lasts
Excellent - application was easy - seems at this point to have staying/darkness abilities. Looks great.
Love this stuff
Works as advertised
Another fantastic Last Cost product!
I ordered Ceratrim to coat the many areas of black plastic trim on my 8 month old SUV. The plastic had already started turning greyish. After cleaning the plastic thoroughly, I used the included applicator to apply and WOW. Then I thought, yeah it looks superblack because it wet! Well, 2 weeks later after 2 washings the trim is just as black, but not only that, the water beads and runs right off. I could not be happier with this product!
Great service and products.
Easy application, say what it does, im very satisfied with the product!!!
The best I ever used !
Awesome, I've been looking for a trim product that doesn't wash off with the first rain you all have got I'm a customer for life!
It does work as it was advertised. I recommend this product to others..
Fast shipping on a great product! This stuff works well on all of my faded trim on my vehicles! I thought well…I put it on and it does a great job of rejuvenating my dark colored trim but will it last? So far I’ve gone through four car washes and it still looks like the day I put it on! All the products I’ve tried so far start to lose their luster! Amazing product!