CeraTrim - Ceramic Powered Trim Restorer (8 oz.)
CeraTrim - Ceramic Powered Trim Restorer (8 oz.)
sold in the last 22 hours
*** Please Note: Due to very high demand of CeraTrim and bottle shortages caused by COVID, some CeraTrim orders may come in clear bottles instead of black. It is the exact same product though.***
Brought to you by The Last Coat comes our ultra-durable ceramic-based trim restorer, CeraTrim.
CeraTrim uses our popular and effective ceramic technology to bond deep into the pores of plastic trim surfaces, removing the impurities that have built up in the plastic and effectively restoring them to their original appearance. Check out the video below to learn more and to see how easy it is to apply and how much to use:
Unlike most trim products, CeraTrim is no mere dressing or stain. It is a true ceramic coating that will give your trim surfaces superior hydrophobic and self-cleaning properties and will protect your trim for the long haul under any driving conditions while restoring them to a newer appearance.
CeraTrim can be used on all trim pieces throughout your vehicle, inside and out. It can be used on engine bay plastics to restore their appearance.
We have also used CeraTrim as a durable tire dressing, but keep in mind this is an "off-label" use and requires 2-3 coats. (please note for interior pieces it will make them glossy, so if you prefer the matte look, best to avoid CeraTrim for the interior.)
CeraTrim can be layered to get an even higher shine or deeper wet look, and even more protection. It can be re-applied over time as desired as well.
All CeraTrim Kits Come with the Following:
➡️ 1 x 8 oz. Bottle of CeraTrim
➡️ 1 x Foam Applicator (this is our preferred way of applying as seen in our videos. We like the foam applicator provided as it allows us to push CeraTrim into the pores of the surface more effectively.)
Directions for Applying CeraTrim:
Step 1: Plastics and rubbers need to be as clean as possible before applying CeraTrim. Any prior dressings should be removed. You do not want anything affecting the bonding of CeraTrim to the trim surface. You will want to use a basic vehicle soap (no wax-based soaps), but in addition, you will need to use a degreaser or all-purpose cleaner (APC) and a soft bristle brush to agitate down into the texture of the plastic or rubber.
Step 2: With high-pressure water, thoroughly rinse the area ensuring to get full removal of any soaps or detergents.
Step 3: If the plastic or rubber doesn't become fully clean and bare, repeat the process until you achieve the deepest clean possible.
Step 4: Thoroughly dry the plastic or rubber and then apply CeraTrim with the included applicator.
Step 5: Allow it to dwell for 5-20 minutes (depending on how faded the surface is).
Step 6: IMPORTANT - DO NOT SKIP THIS STEP - After the dwell period take a dry microfiber towel and buff the trim surface to remove excess residue that will be sitting on top. This is very important.
Please Note: Full cure time for CeraTrim is 24 hours. Do not let these surfaces get wet in the first 24 hours after application.
We know you'll love CeraTrim as much as we do and as much as our customers have. It is a versatile, durable, true restoration product that will bring trim plastics and rubbers back to life in a big way, and keeping them looking that way for a long time! If you have any questions, feel free to reach out to us.
***Please note, applying CeraTrim can make surfaces very slick when wet, so when applying to running boards on your vehicle please keep this in mind as they may be quite slippery when wet.***
Proposition 65 Warning: This product contains Methanol which is on the Prop 65 List for Chemicals of Concern. For more information go to www.P65Warnings.ca.gov
- Cera Trim
The best product i have ever used. Amazing customer service as well. I will definitely order from here from now on!
The last coat has made my vehicle shine like no other then applying AMP makes an even better shine. It really is that easy. The foaming attachment works well but the last soap leaves a residue every time if you fail to dry the vehicle with a cloth/towel. I wash hoping to just apply and rinse the vehicle with lose dirt/dust but this is just not the case. Even with the foaming attachment you will have to hand wash and dry or you will have spots. Cera trim really brings back all plastics on the vehicle and makes it look brand new for a long time. However, after it rained I noticed the gel ran off of the plastic and onto the finish. Though it did wash off, it was a pain to get off the windows. Iron off wheel cleaner worked as stated with a little attention to heavier areas. The change in color made it easy to determine when the product was ready to be washed away. Always applied with cool to the touch wheels along with a cool morning/evening.
I couldn’t believe how good this worked! I was a little skeptical but I tried it and Holly cow did it look amazing! I wish I would have known about this when I first bought my car.
Did on my engine bay and the bed trims
I've only used it a short time but so far I'm impressed. It's leaves the trim nice and black and very slick. No complaints at all with it's results and ease of use.
had my detailer try out this Last Coat New formula on my brand new 2021 black sapphire X5. He was very impressed how easy this product was to apply and the results are outstanding! Also the ceramic trim on tires is awesome.
I took the time to clean the trim with your car wash first. When it was dry I applied the cera trim. Wiped it off with clean rag. It really made the black trim still looks great.
I used Ceratrim on my Avalanche and the faded trim looks almost new and so far the product is holding up well. It was easy to apply.
Apply as directed. Products are awsome Shine and protect Will purchase more
I bought the cera trim gel and finally got a chance to apply it yesterday. I used another product previously and was not happy with the results so I decided to give this a try. I’m happy I did! It took a while for me to apply the gel because it was my first time and I was trying not to get it all over the paint or windows. Application was easy and the results look fantastic. The trim has a deep dark shine and does not have any faded spots. It is supposed to rain later today so I will be anxious to see how it holds up to water. Extremely happy with the results so far!