Bare Slate Clay Mitt

126 reviews

Bare Slate Clay Mitt

126 reviews

sold in the last 22 hours

$49.95 $34.95 (30% savings)


All our products adhere to the strictest of COV-19 virus policies to ensure your products are packed and arrive safely.

Order today and have it delivered to your door by:

Bare Slate by The Last Coat is the highest performing clay mitt that money can buy.

It’s “The Perfect Start for Getting the Ultimate Showroom Finish in Half the Time”.

Bare Slate redefines the way you look at prepping a surface, and will change your approach on claying your vehicle. Bare Slate is a hybrid combination of the most advanced technology in polymer rubber, with the finest premium microfiber cloth.

This means that Bare Slate will safely and easily decontaminate your surface from dirt, dust, tree sap, bugs, pollutants, and even water spots. Bare Slate works great on vehicle paint, plastic, rubber molding, and especially glass!

It's extremely versatile in that it can be used with any traditional clay lubricant to provide an effortless glide, or using a high quality soap such as The Last Soap.

To clean Bare Slate, simply rinse it well under water, and it will perform as new each time you use it.


Step 1: Thoroughly rinse your vehicle of making it free of dust, sand, and dirt.

Step 2: **Make sure to keep HIGH levels of lubrication at ALL times to avoid marring of the surface.** If using a traditional clay lubricant, apply clay lubricant to make the surface extremely slick and proceed to Step 3. However, if using a soap such as The Last Soap, begin washing the vehicle with either foam cannon or by using a wash bucket. With the surface still wet, clean out your wash bucket and add another 2-3 ounces of soap to approximately 1 gallon of water. Then, stick the clay mitt into the bucket so that it is fully wet, and proceed to Step 3.

Step 3: Lightly polish the surface of the vehicle with Bare Slate, applying light pressure, similar to how you would wash the vehicle. Ensure that Bare Slate and the vehicle surface stay wet and lubricated to avoid scratching and marring on the vehicle clear coat. Re-lubricate at minimum every 2' x 2' area. See more notes below.

“IMPORTANT: It bears repeating, make sure to keep VERY HIGH level of lubrication at ALL times using the Bare Slate Clay Mitt, with very light pressure, to avoid marring or residue on the surface. Do NOT use the same pressure as you would when washing. A little goes a long way here. Make sure to read all steps below:”

1) Thoroughly rinse the vehicle making it free of dust, sand, and dirt.

2) Use only on a clean and cool surface, out of direct sunlight if possible. Do NOT work on a surface over 144 degrees F. Be on the cautious side with temperature.

3) The Bare Slate Clay Mitt should be turned over and rinsed regularly to reduce the risk of removed contamination scratching the paintwork.

4) At a minimum, you should re-lubricate every 2’ x 2’ area of a panel. Be very generous on lubrication throughout the entire process. A good rule of thumb to err on the side of caution is 2-3 oz of soap to approximately 1 gallon of water.

5) When finished, rinse off/pressure wash off thoroughly when done, and store in a cool and dark place.

6) In the event of any residue, use 70% Isopropyl Alcohol on microfiber to remove it. But if you follow all precautions properly you should have no problems.


Customer Reviews
4.9 Based on 126 reviews
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • coat
  • Clay Mitt
  • shine
  • paint
  • results
  • vehicle
  • finish
  • truck
  • mitt
  • TLC2
Ronald F.
United States United States
1st time user of this product.

I washed my Highlander with their soap, I clay my Highlander with their mitt, I used the "Last Coat" and over that applied their "Amp". My Highlader looks super and I cannot believe how "slick" the paint feels. Now, I'll see if the shine and feel lasts. ALL IS GREAT SO FAR.

Oscar T.
United States United States
Best clay mitt

Over all experience was superb service delivery and of course the product best in its class enjoying it can’t wait to order more products

A The Last Coat Customer
Craig F.
United States United States

Watched the video on website Applied last coat Works great

Sue J.
United States United States
Wonder products

Works great a lot easier then clay bar

United States United States
VERY CLEAN/SHINY 1999 Chevrolet Suburban LS 4X4 Thanks to the last coat

This product is amazing to car paint the level of shin is very much what I’ve been looking for in the last 30 years keep up the good work making professional products.

The Last Coat Bare Slate Clay Mitt Review
Mike K.
United States United States
Easy sparkling shine

Excellent and so easy to apply

james b.
United States United States

I give you guys 110percent now I have people stop or if I’m at a red light they ask what do I use and also my cleaning business has picked up heavy thanks guys

The Last Coat Bare Slate Clay Mitt Review
teddy h.
United States United States
Service was great

It came quickly in the mail UNFORTUNATELY my car got STOLEN so I’m stuck in a rental for two weeks more until I have another car. But I’m sure it will be 5 star

United States United States
So easy

Cannot believe how easy TLC is to apply and remove. So happy I was talked into buying by my father.

James H.
United States United States
Excellent Product

I applied two coats of TLC2, and one coat of AMP to me A4. I also applied one coat of each to the windows. The shine is awesome, and the windows have a nice close appearance. I spilled some water on the roof, and it rolled of the entire car, just a few touches with a dry towel. The soap sprayer make the initial cleaning so easy. The car has a beautiful shine, and the whole process took a little over an hour. Used very little product. I highly recommend TLC, along with AMP. The soap sprayer makes it a lot easier, but a bucket would work good too. There microfiber towels are the best I have used.