CeraTrim - Ceramic Powered Trim Restorer (8 oz.)

378 reviews

CeraTrim - Ceramic Powered Trim Restorer (8 oz.)

378 reviews

sold in the last 22 hours

$44.95 $29.97 (33% savings)


All our products adhere to the strictest of COV-19 virus policies to ensure your products are packed and arrive safely.

Order today and have it delivered to your door by:

Brought to you by The Last Coat comes our ultra-durable ceramic-based trim restorer, CeraTrim.

CeraTrim uses our popular and effective ceramic technology to bond deep into the pores of plastic trim surfaces, removing the impurities that have built up in the plastic and effectively restoring them to their original appearance. Check out the video below to learn more and to see how easy it is to apply and how much to use:

Unlike most trim products
, CeraTrim is no mere dressing or stain. It is a true ceramic coating that will give your trim surfaces superior hydrophobic and self-cleaning properties and will protect your trim for the long haul under any driving conditions while restoring them to a newer appearance.

CeraTrim can be used on all trim pieces throughout your vehicle, inside and out. It can be used on engine bay plastics to restore their appearance.

We have also used CeraTrim as a durable tire dressing, but keep in mind this is an "off-label" use and requires 2-3 coats. (please note for interior pieces it will make them glossy, so if you prefer the matte look, best to avoid CeraTrim for the interior.)

CeraTrim can be layered to get an even higher shine or deeper wet look, and even more protection. It can be re-applied over time as desired as well.

All CeraTrim Kits Come with the Following:

➡️ 1 x 8 oz. Bottle of CeraTrim

➡️ 1 x Foam Applicator (this is our preferred way of applying as seen in our videos. We like the foam applicator provided as it allows us to push CeraTrim into the pores of the surface more effectively.)

Directions for Applying CeraTrim:

Step 1: Plastics and rubbers need to be as clean as possible before applying CeraTrim. Any prior dressings should be removed. You do not want anything affecting the bonding of CeraTrim to the trim surface. You will want to use a basic vehicle soap (no wax-based soaps), but in addition, you will need to use a degreaser or all-purpose cleaner (APC) and a soft bristle brush to agitate down into the texture of the plastic or rubber.

Step 2: With high-pressure water, thoroughly rinse the area ensuring to get full removal of any soaps or detergents.

Step 3: If the plastic or rubber doesn't become fully clean and bare, repeat the process until you achieve the deepest clean possible.

Step 4: Thoroughly dry the plastic or rubber and then apply CeraTrim with the included applicator.

Step 5: Allow it to dwell for 5-20 minutes (depending on how faded the surface is).

Step 6: IMPORTANT - DO NOT SKIP THIS STEP - After the dwell period take a dry microfiber towel and buff the trim surface to remove excess residue that will be sitting on top. This is very important.

Please Note: Full cure time for CeraTrim is 24 hours. Do not let these surfaces get wet in the first 24 hours after application.

We know you'll love CeraTrim as much as we do and as much as our customers have. It is a versatile, durable, true restoration product that will bring trim plastics and rubbers back to life in a big way, and keeping them looking that way for a long time! If you have any questions, feel free to reach out to us.

***Please note, applying CeraTrim can make surfaces very slick when wet, so when applying to running boards on your vehicle please keep this in mind as they may be quite slippery when wet.***


Proposition 65 Warning: This product contains Methanol which is on the Prop 65 List for Chemicals of Concern. For more information go to www.P65Warnings.ca.gov
Customer Reviews
5.0 Based on 378 reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • trim
  • results
  • stuff
  • coat
  • shine
  • truck
  • application
  • plastic
  • Cera Trim
  • vehicle
Ian S.
United Kingdom United Kingdom

Like new

Excellent product that has exceeded all expectations. The trim on my 2006 BMW X5 was very much looking its age. Just one coat of Cera-Trim has breathed new life into the greyed and tired plastic. The tyres have also come up a treat. Gave the wife’s 2015 Mini the same treatment and again the results are excellent, her verdict… “showroom quality”. It’s easy to apply and you don’t need to go crazy as a little goes a **** of a long way.

Charles M.
United States United States


I have used Last Cost products for 2 years and the surface looks better than ever on a 22 yo Mercedes

George k.
Greece Greece

Don’t think,BUY IT right now

If you don’t want to loose your time and money you must stop searching to other products You want plastics etc like new and better this is for you

Raul Dorado. SR
United States United States


Awesome it is described the vender to the shine. Good job

Intikhab A.
Canada Canada

Great product

The gel was thick to use, had to put in the work but the result was amazing. After I had finished I just wanted to sit and admire my vehicle all day. I even got three comments on how good my vehicle looked within 2 hours of going to the supermarket. Most trim dressing I used lasted two weeks before it began to fade. Has been three weeks now and four days of heavy rain and my trim still looks great.

charles T.
United States United States

Cera trim !!!

I tried others now I’ve found the Best! In the hot Arizona sun this stuff is great it stands up to the washing and the sun and still looks great

William B.
United States United States

The Last Coat Products

Every product from you guys has far exceeded my expectations. That’s why I will keep coming back. My Ceramic Trim is remarkable. Next up will be Cera Tex for my interior! I am confident that it will be great! Thanks again!

Blair H.
United States United States

CeraTrim - Ceramic Powered Trim Restorer

This product did great on my trim.

Russell P.
United States United States

Cera trim review on Ducati saddle bags

I recently purchased a 21 year old Ducati ST4 and the black abs on the saddle bags was showing its age as it had faded to an inconsistent stone gray where it was exposed to the sun. I bought this product and it restored the plastic back to the original shiny black. Couldn’t be happier.

The Last Coat CeraTrim - Ceramic Powered Trim Restorer (8 oz.) Review
Robert H.
United States United States

Cera Trim

I used Cera Trim on my 2013 F150. My rubber and plastic trim on the outside of my truck was looking grayish, so I used Cera Trim on on all trim etc. My truck looks sooo much better after the Cera Trim application. The whole application was fairly easy, just a little elbo grease.