CeraTrim - Ceramic Powered Trim Restorer (8 oz.)

359 reviews

CeraTrim - Ceramic Powered Trim Restorer (8 oz.)

359 reviews

sold in the last 22 hours

$44.95 $29.97 (33% savings)


All our products adhere to the strictest of COV-19 virus policies to ensure your products are packed and arrive safely.

Order today and have it delivered to your door by:

Brought to you by The Last Coat comes our ultra-durable ceramic-based trim restorer, CeraTrim.

CeraTrim uses our popular and effective ceramic technology to bond deep into the pores of plastic trim surfaces, removing the impurities that have built up in the plastic and effectively restoring them to their original appearance. Check out the video below to learn more and to see how easy it is to apply and how much to use:

Unlike most trim products
, CeraTrim is no mere dressing or stain. It is a true ceramic coating that will give your trim surfaces superior hydrophobic and self-cleaning properties and will protect your trim for the long haul under any driving conditions while restoring them to a newer appearance.

CeraTrim can be used on all trim pieces throughout your vehicle, inside and out. It can be used on engine bay plastics to restore their appearance.

We have also used CeraTrim as a durable tire dressing, but keep in mind this is an "off-label" use and requires 2-3 coats. (please note for interior pieces it will make them glossy, so if you prefer the matte look, best to avoid CeraTrim for the interior.)

CeraTrim can be layered to get an even higher shine or deeper wet look, and even more protection. It can be re-applied over time as desired as well.

All CeraTrim Kits Come with the Following:

➡️ 1 x 8 oz. Bottle of CeraTrim

➡️ 1 x Foam Applicator (this is our preferred way of applying as seen in our videos. We like the foam applicator provided as it allows us to push CeraTrim into the pores of the surface more effectively.)

Directions for Applying CeraTrim:

Step 1: Plastics and rubbers need to be as clean as possible before applying CeraTrim. Any prior dressings should be removed. You do not want anything affecting the bonding of CeraTrim to the trim surface. You will want to use a basic vehicle soap (no wax-based soaps), but in addition, you will need to use a degreaser or all-purpose cleaner (APC) and a soft bristle brush to agitate down into the texture of the plastic or rubber.

Step 2: With high-pressure water, thoroughly rinse the area ensuring to get full removal of any soaps or detergents.

Step 3: If the plastic or rubber doesn't become fully clean and bare, repeat the process until you achieve the deepest clean possible.

Step 4: Thoroughly dry the plastic or rubber and then apply CeraTrim with the included applicator.

Step 5: Allow it to dwell for 5-20 minutes (depending on how faded the surface is).

Step 6: IMPORTANT - DO NOT SKIP THIS STEP - After the dwell period take a dry microfiber towel and buff the trim surface to remove excess residue that will be sitting on top. This is very important.

Please Note: Full cure time for CeraTrim is 24 hours. Do not let these surfaces get wet in the first 24 hours after application.

We know you'll love CeraTrim as much as we do and as much as our customers have. It is a versatile, durable, true restoration product that will bring trim plastics and rubbers back to life in a big way, and keeping them looking that way for a long time! If you have any questions, feel free to reach out to us.

***Please note, applying CeraTrim can make surfaces very slick when wet, so when applying to running boards on your vehicle please keep this in mind as they may be quite slippery when wet.***


Proposition 65 Warning: This product contains Methanol which is on the Prop 65 List for Chemicals of Concern. For more information go to www.P65Warnings.ca.gov
Customer Reviews
5.0 Based on 359 reviews
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • trim
  • results
  • stuff
  • coat
  • shine
  • truck
  • application
  • Cera Trim
  • vehicle
  • plastic
Mid m.
United States United States
Cera trim restorer

Works like a charm. Easy to apply… woks best when you mask off the trim from paint and windows.. takes a little bit longer but trim looks new on 8 year plastic that was heavily sun faded. Have used most products on the market and this is by far and away the best product I have used.

Carol G.
United States United States

I ❤️ LOVE this product ! I will definitely be ordering more when I run out of what I bought I have never had my car so shiny and beautiful it looks like a glass mirror and it lasts days and days and weeks through all the weather I am so happy I purchased this product and tried it

Mike B.
Minneapolis, mn Minneapolis, mn
Solution to Land Rover trim problem - Cera Trim!

I just purchased a 2020 Land Rover with about 5000 miles. While researching this vehicle I read a lot of reports about how Land Rovers black plastic trim, especially on and around the exterior mirror, fade a lot. Mine had this condition, it appears to be etched to a light flat charcoal color, probably from UV; anyway, over last weekend I did a complete clean and paint treatment with Iron Out, Last Soap and Black Ice. I tried applying Blalck Ice to a small spot on the plastic with no real effect. However, just recently I bought a bottle of Cera Trim so I tried that. I applied it generously, let it sit for about 5 minutes then gently buffed it off. The result was remarkable so proceeded to apply two more coats in the same fashion. Now the result is a gloss finish as it would have been when new. This issue is all over most of the Land Rover forums so you might want to post something to them regarding how your product solves this problem. Thanks!

Vence C.
Arkansas Arkansas
Great protection and shine

I have a bad used car lot at my house. Lots of older vehicles that my tribe drives. I use CeraTrim to bring back shine on all the sun bleached trim! I have tried other products but always end up using CeraTrim because the others just don’t last as long or provide the same shine!

Michael S.
United States United States
Cera Trim

This product was the easiest I've ever used. Not only the best but what a shine it left.

Makes trum look better than new

Excellent product. Not a fan of applicator sent. I used it and a coating applicaotor. Coating applicator much easier to use and waste less product. Great for trim. Highly recommend.

Jeff G.
United States United States

It works way better than back to black. I have a 2016 Porsche that still looked good but this made it look great. Thanks

Russell S.
Virginia USA Virginia USA
CeraTrim Restorer

Like many of you I’ve been duped by online reviews naming the best trim restorer and my last buy was again a big letdown. The product claimed to be streak free, well it rained three days after my initial application and my side panels had oblivious water streaks. So, I purchased CeraTrim and applied following the easy to follow application process and no more streaks. This has made me realize I’m wasting time and money looking for the best car care products when I have the best product available through TLC.

Jesse N.
United States United States
Cera Trim

Product is great! Made the trim on my Jeep look brand new.

Joseph T.
United States United States
Cera Trim

Applied very easy and totally transformed all my plastic trim!!!

The Last Coat CeraTrim - Ceramic Powered Trim Restorer (8 oz.) Review